7.2.2. Camera
Day/Night Mode
Mode: Select a mode from the drop-down list. The default Day/Night mode is Auto(Light sensor).
Auto(Light sensor): Select to let the camera automatically switch to Day mode (color images)
•
or Night mode (black and white images with IR LED on) based on the light sensor's detection
on the light level.
Auto(AGC): Select to let the camera automatically switch to Day mode (color images) or
•
Night mode (black and white images with IR LED on) based on the AGC value of the current
video image.
Color: Select to keep the camera in Day mode (color images with IR LED off), even in
•
nighttime.
Black White: Select to keep the camera in Night mode (black and white images with IR LED
•
on), even in daytime.
Switching Time: Select the transition duration a switching will take for Auto(AGC) Day/Night Mode,
from 0 to 30 second(s). The default switching time is 3 seconds.
Day to Night: You can configure the sensitivity for Auto(AGC) Day/Night Mode ranging from 0-255.
The camera will automatically switch from day mode to night mode based on the setup sensitivity.
The default value is 20.
56
Value IP 288 / 368 / 468 Series