EverFocus 288 Series User Manual page 67

3. Set up schedules to active the alarm functions and send alarm notification. Check the box of
the desired section to configure the schedule, and select a start / end time from the
drop-down list for the section.
4. On the preview window, click and drag to draw the desired Motion Detect area, the area will
be marked in red.
5. You can remove the configured Motion Detection area by clicking the Clear button.
6. Set up event reactions for the Motion Detection function. Check the box of the desired
reaction (Email, Snapshot, Record or Alarm output) to link with the function.
Email: Check the box to enable transmitting the alarm notification to the mail server. To
configure Email settings, see 7.3.2.1 Email Settings.
Snapshot: Check the box to enable taking snapshots to the micro SD Card when an event
occurs. You can further configure the Snapshot settings including Snapshot Interval and
Snapshot No.. For example, if you set up the Snapshot Interval to 5 and Snapshot No. to 3,
system will take 3 snapshots every 5 seconds.
Record: Check the box to enable recording to the micro SD Card when an event occurs.
Alarm Output: Check the box to enable triggering the external alarm device.
After complete the settings, click Save to apply the settings.
Note: The Snapshot and Record settings are only functional if the micro SD Card has been
inserted in the camera's micro SD card slot.
61
Value IP 288 / 368 / 468 Series