EverFocus 288 Series User Manual page 16

For Economic models, the cables provide connections for Network, power and Reset Button.
Reset Button
12VDC Input
LAN / PoE Cable
Audio Function
TRS Connector
Ground (Sleeve)
Right Channel (Ring)
Left Channel (Tip)
Pin Assignment
Alarm Output / RS-485 (reserved)
Alarm Output
RS-485
(reserved)
Reset Button
1. Reboot the camera:
When the camera is powered up, press the Reset Button will reboot the camera.
2. Restore the camera:
Keep the Reset Button pressed, at the same time unplug the camera power then plug it back again
will return camera settings to the factory default values.
Cables of Economic Models
Model
EBN288/368/468
EDN288M/368M/468M Yes
EMN468/468W
EZN288/368/468
EZN288M/368M/468M
To activate the Audio function, the Complex Stream must be
selected. See Stream in 7.2.1.2 Streaming Settings.
COM (-)
NO (+)
B (+)
A (-)
10
Value IP 288 / 368 / 468 Series
LAN/PoE
Yes
Yes
Yes
Yes
Alarm Input
Alarm In 1
Alarm In 2
12VDC Reset Button
Yes (with a
Yes
dust-proof cap)
Yes -
Yes -
Yes -
Yes (with a
Yes
dust-proof cap)
GND (-)
Alarm In (+)
Alarm In (+)
GND (-)