Table of Contents
Advertisement
Quick Links
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not have camera immersed in water.
2.
Do not disassemble it or place it on an unstable base.
3.
Do not touch the surface of CCD sensor by hand directly.
4.
Never face the camera toward the sun.
5.
Use proper power source otherwise the camera will not function correctly.
6.
Use the camera at temperatures within 0℃ ~ 50℃/32℉~122℉ and humidity between 20%~
80%. The input power sources are 12VDC only and 12VDC/24VAC.
EVERFOCUS
Color Dome Camera
Operation Instructions
ED300E/200E
Model No.
Advertisement
Table of Contents
Related Manuals for EverFocus ED200E
Summary of Contents for EverFocus ED200E
-
Page 1: Operation Instructions
Use proper power source otherwise the camera will not function correctly. Use the camera at temperatures within 0℃ ~ 50℃/32℉~122℉ and humidity between 20%~ 80%. The input power sources are 12VDC only and 12VDC/24VAC. EVERFOCUS Color Dome Camera Operation Instructions ED300E/200E Model No. -
Page 2: Standard Accessories
PREFACE The ED200/300 color dome camera with vari-focal/fixed Lens Series are compact, CCD Color Cameras. Their stylish appearance can be applied as per installer's ideal locations on the ceiling. The dome camera design with advance digital processing circuitry for middle/high-resolution 1/3" color interlines transfer CCD sensor, it has DIP switch for FL ON/OFF, Mirror ON/OFF, AGC ON/OFF and D/N ON/OFF. -
Page 3: Major Parts Names And Functions
MAJOR PARTS NAMES AND FUNCTIONS ○ ○ ○ ○... - Page 4 ○ Camera Cover This cover will protect the camera for avoiding dust and damage. ○ Lens This vari-focal Lens allows users to adjust the Zoom and Focus manually. Built-in fixed lens: 3.6; 4.3; 6.0 or 8.0 mm ○ Base The camera unit sets in the dome base, when it is shipping from the factory. ○...
-
Page 5: Installation
○ Power input Please connect the connector of camera to 12VDC or 24VAC power source. ○ Video Output BNC Connector Please connect to the BNC connector of Monitor video in. INSTALLATION 1. Remove the plastic dome cover. 2. Lossen the two screws of the supporting bracket to remove the camera body. 3. - Page 6 LENS ADJUSTMENT (For Vari-Focal Lens only) Zoom and focus adjustments After the camera is installed, the zoom and focus of the lens must to be adjusted. 1. Loosen the zoom ring knob, and turn the ring towards <W> or <T> if necessary. W side (Zoom out) The viewing range will be wider and the target is smaller.
- Page 7 ADJUSTMENT FL (Flickerless) When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electronic shutter at 1/100(S)(NTSC) or 1/120(S)(PAL) automatically, and reduce the flicker immediately. The default setting is OFF. Mirror Mirror ON: Set a horizontal image inversion. Mirror OFF: Disable the inversion.
-
Page 8: Specifications
Power Consumption Dimensions Weight Operating Temperature Certifications *Lens models and availability vary in different regions ED200E 1/3'' SONY Super HAD CCD NTSC or PAL NTSC: 525 TV lines, 60 fields/sec PAL: 625 TV lines, 50 fields/sec. NTSC: 510(H) x 492(V);... - Page 9 415 Oser Avenue Unit S Hauppauge, NY 11788 TEL: 631-436-5070 FAX: 631-436-5027 www.everfocus.com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.