Camera; Lens Ctrl - EverFocus 288 Series User Manual

6.2 Camera

Click the Camera tab to display the camera quick setup panel.

6.3 Lens CTRL

Click the Lens CTRL tab to display the lens control quick setup panel.
Note:
1. By default, the system will automatically adjust the IR LED strength according to the scene, so
please avoid IR reflection when installing the camera to prevent out-of-focus at night.
2. Under Auto focus mode, if the camera does not focus after switching the Day/Night mode, it is
recommended to switch the focus mode to Manual and adjust focus manually.
Brightness: Slide the bar to adjust brightness.
Hue: Slide the bar to adjust hue.
Saturation: Slide the bar to adjust saturation.
Contrast: Slide the bar to adjust contrast.
Sharpness: Slide the bar to adjust sharpness.
Default: Click to return the above value to factory
default.
Color Mode: Select a color mode from Normal, Bright
or Nature. The default color mode is Normal.
Mirror: Select a mirror mode from OFF, Horizontal
Mirror, Vertical Mirror or 90 / 180 / 270 degree
Rotation (see 7.2.3 Image for more details). The
default Mirror mode is OFF.
Exposure Time: Select an exposure mode from auto
or a shutter speed (from 1/25 ~ 1/10,000 seconds).
AGC: For Auto Exposure mode, you can further
configure the AGC value. Select the Auto Gain Control
level from Low to High (see 7.2.2 Camera for more
details). The default AGC level is Mid-High.
TWDR: There are four value options: Close, Low, Mid
and High (see 7.2.2 Camera for more details). The
default TWDR mode is OFF.
Focus Mode: Select a focus mode from Auto, or
Manual. For Manual, use the Focus Near / Focus Far
buttons to adjust focus.
Speed: Use the slider to adjust the speed for Zoom
and Focus.
Zoom In / Zoom Out: Use the buttons to adjust Zoom
in or out.
Focus Near / Focus Far: Use the buttons to adjust
Focus near or far.
33
Value IP 288 / 368 / 468 Series