EverFocus 288 Series User Manual page 26

c. Place the Waterproof Ring into the LAN / PoE cable. Connect the RJ-45 cable to the RJ-45
Connector Cable. Tightly screw the Cable Gland and Screw Cap to the RJ-45 Connector Cable.
6. Optionally connect the camera to the 12VDC power source using the supplied Power Adapter
Pigtail or a power adapter.
7. Access the camera live view. See 5. Accessing the Camera. Or connect a handheld test monitor to
the CVBS wire on the Cable Assembly for adjusting viewing angles.
8. To adjust the camera angles:
Pan Adjustment: Loosen the Set Screw using the supplied Hexagon Wrench. Rotate the camera by
360° to the desired position and screw the Set Screw until it locks against the Camera Base.
EZN288/368/468
Camera
Base
Set Screw
360°
Camera Base
Set Screw
360°
EZN288M/368M/468M
20
Value IP 288 / 368 / 468 Series