EverFocus 288 Series User Manual page 20

EDN288M/368M/468M
1. Before screwing the camera to the wall, stick the Sticker on the wall / ceiling to mark the position
for installation. According to the supplied Sticker, drill three screw-depth holes on the wall / ceiling,
and then drill a through-wall hole for wiring the camera cables. Push the supplied three Screw
Anchors into the three holes on the wall / ceiling.
Wall or Ceiling
2. Unscrew the camera cover and screw the camera base to the ceiling / wall by using the supplied
Screws.
3. Optionally insert the micro SDHC / SDXC card. Please refer to 4.4.2 Inserting a micro SD Card.
4. Connect the LAN / PoE cable to the camera.
a. Remove the Screw Cap from the Cable Gland.
Sticker
Anchors
Screws
14
Value IP 288 / 368 / 468 Series