Date / Time; Date/Time Settings; Ntp Settings - EverFocus 288 Series User Manual

7.1.2. Date / Time

You can set up the system's time and NTP server. Click the tab of the one you want to see.
Note: Before start operating the IP camera, please make sure the camera date and time are
correct.

7.1.2.1. Date/Time Settings

Device Time: Display the device current time. You can manually set up and click Apply to save the
time setting. Click PC to automatically adjust the camera's time by synchronizing with the PC.
After complete the settings, click Save to apply the changes.

7.1.2.2. NTP Settings

Enable: Check the box to enable NTP function.
NTP Server Address: Enter the Network Time Protocol server, if applicable. The camera's time will
be automatically adjusted by synchronizing with the NTP server.
40
Value IP 288 / 368 / 468 Series