b. Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through the Cable
Gland and Screw Cap.
c. Place the Waterproof Ring into the LAN / PoE cable. Connect the RJ-45 cable to the RJ-45
Connector Cable. Tightly screw the Cable Gland and Screw Cap to the RJ-45 Connector Cable.
9. Optionally connect the camera to the 12VDC power source using the supplied Power Adapter
Pigtail or a power adapter.
13
Value IP 288 / 368 / 468 Series