EverFocus 288 Series User Manual page 27

Tilt Adjustment: Loosen the Set Screw using the provided Hexagon Wrench and adjust the angle
by 90°.
Set Screw
EZN288/368/468
Rotational Adjustment: Loosen the Screw using the provided Hexagon Wrench and rotate the
camera by 360°.
Set Screw
EZN288/368/468
Note:
1. Before start operating the IP camera, please make sure the camera date and time are correct.
To configure the camera date/time, go to System > Date/Time setting page on Web UI.
2. By default, the system will automatically adjust the IR LED strength according to the scene, so
please avoid IR reflection when installing the camera to prevent out-of-focus at night.
3. Under Auto focus mode, if the camera does not focus after switching the Day/Night mode, it is
recommended to switch the focus mode to Manual and adjust focus manually.
90°
21
Value IP 288 / 368 / 468 Series
Set Screw
EZN288M/368M/468M
Set Screw
EZN288M/368M/468M
90°