EverFocus 288 Series User Manual page 22

Value IP 288 / 368 / 468 Series
Rotational Adjustment: Loosen the rotate screw and rotate the camera left / right to the desired
position, then tighten the rotate screw. Due to the internal connector design, it is recommended
not to rotate the camera more than 30°.
30°
30°
Rotation screw
Tilt Adjustment: Loosen the two tilt screws and adjust the angle by 75° to the desired position, then
tighten the tilt screw.
Tilt screw
75°
8. Secure the cover back to the camera.
16