Dst Settings - EverFocus 288 Series User Manual

Value IP 288 / 368 / 468 Series
NTP Port: Enter the Network Time Protocol port. The default port number is 123.
Interval for Time Sync: Input the interval time for automatic time synchronization with NTP.
Select Time Zone: Select the time zone of the camera's location.
GMT: Check the Adjust box to enable adjusting the offset and set the desired minute in the
min field.
After complete the settings, click Save to apply the changes.

7.1.2.3. DST Settings

Enable: Check the box to enable DST function.
From: Select the date and time when the region's daylight saving time to start.
To: Select the date and time when the region's daylight saving time to end.
DST Bias: Select a shift time for the DST function.
After complete the settings, click Save to apply the changes.
41