Table of Contents
Advertisement
5.2. Settings for Microsoft Internet Explorer
If you have difficulties viewing live view or upgrading firmware, it is suggested to complete the following
settings of your computer.
1. If your PC or laptop is running with Windows, it' s required to run the browser as administrator
when first entering the remote web page of the device. Go to C:\Program Files (x86)\Internet
Explorer, right-click the browser and then click Run as administrator.
2. You may need to turn User Account Control off if you still can't see the Remote Live View. On the
computer, click Start > Control Panel > System and Security > Action Center (click Change User
Account Control Settings), the User Account Control Settings window appears. Adjust the slide bar
to Never Notify and then click OK. Restart your computer if requested.
Note: For Windows 8 and Windows 10 user, if you still fail to view live view or upgrade firmware after
configuring Microsoft Internet Explorer setting, please refer to C. Snapshot / Record error message
(for Windows 8 and Windows 10 users). in
10. Troubleshooting
for further configuration.
14
EZN7221/7260/7360
Advertisement
Table of Contents
