System Maintenance; Upgrade Firmware; Auto Reboot - EverFocus 288 Series User Manual

7.1.6. System Maintenance

7.1.5.1. Upgrade Firmware

Click the Browse button to find a previously prepared firmware upgrade file. Click the Update
button to install the new firmware. You can also upgrade firmware using IP Utility, see
Upgrading Firmware Using IP
Note:
1. System updating should only be accomplished by trained staff.
2. Do not disconnect power to the IP camera during the upgrade sequence. The IP camera
will reboot automatically after the upgrade has completed (1-5 minutes).

7.1.5.2. Auto Reboot

Select OFF to disable the Auto Reboot function, or select an interval for the Auto Reboot function
from Every Day, Every Week or One Time. The IP camera will automatically reboot at the specified
time.
Utility.
45
Value IP 288 / 368 / 468 Series
8.