Indoor color mini dome camera, outdoor day/night 3-axis vandal dome camera, outdoor color 3-axis vandal dome camera, outdoor day/night ir 3-axis vandal dome camera, outdoor day/night mini bullet, indoor color non-functioning side view smoke detector camer (14 pages)
This document shows you how to install IP99 camera step by step 1. Read the product introduction and package content 2. Read the specification and diagram 3. See hardware overview 4. Do wiring and installation 5. Do network connection Product introduction IP99 series IP products provides built-in, easy-to-use, and browser-based management software that can manage, view, record multiples IP99 cameras and video servers.
high quality images. User can view the images through any web browser. Widely applicable — IP99 series provides live images on the network, it enhances functionality of traditional television system. IP99 series allows direct connection to visit remote video through standard IE, user can view local image as well as remote video any time any where.
SPECIFICATIONS CAMERA Pickup Device Video Format Pixel Effective Sensitivity Day & Night Lens Video Output Video Output Resolution AUDIO Audio Input Audio Format VIDEO Electronic Shutter Backlight Comp. Mirror Auto Iris AGC/Brightness/Contrast/Color Video Comclickion Video Resolution Frame Rate NETWORK Interface Supported Protocols Network Security Max.
Hardware Overview Reset: loading factory default configuration by pressing the button, which is inside this hole. Please insert the keen-edged device to the hole for 10 seconds. RS485(Pelco-P/Pelco-D): RS 485 Connector functionally reserved for PTZ control. Power LED: Power LED will light up when power is ON. Ethernet RJ-45 port: Connect to LAN via this standard RJ-45 connector.
Installation a. Mount camera bracket BA-01, BA-03 (optional) on the wall. And screw it on the wall firmly. b. Mount Camera on the bracket c. Connect a lens on the camera. Connect DC iris plug if using DC auto iris lens d.
2. Direct High Speed Connection Direct High Speed Connection connect camera directly to modem without a router. You need to assign the IP address you obtain from internet service provider to IP camera/ Encoder. To access the camera, just type http:// IP address of your internet provider. If you have a dynamic IP address, this connection doesn’t work for you.