EverFocus 288 Series User Manual page 42

Value IP 288 / 368 / 468 Series
Subnet Mask: This field is used to set the subnet mask for your network, so that the IP camera
will be recognized within the network. Example: 255.255.255.0. When DHCP is selected, the
DHCP server will assign this value automatically.
Gateway: This field is used to set the gateway for your network so that the IP camera will be
recognized within the network. When DHCP is selected, the DHCP server will assign this value
automatically.
Primary DNS: Enter the IP address of the DNS server if this is provided by an ISP.
Secondary DNS: If your ISP provided you with a secondary DNS address, please enter it here.
MAC: The value of MAC address cannot be changed on this page, and are for reference only.
HTTP Port: Enter HTTP port numbers. The default port number is 80.
HTTPS Port: Enter HTTPS port numbers. The default port number is 443.
RTSP Port: Use domain name to access and login device need mapping RTSP. The default port
number is 554.
RTMP Port: Use domain name to access and login device need mapping RTMP. The default port
number is 1935.
Enable UPnP: Click the box to enable UPnP. Promoted by the UPnP Forum (Universal Plug and
Play), the UPnP is a networking architecture providing compatibility among networked devices
listed in the networked device table. Enable the UPnP function means you can directly connect
the cameras listed in the networked device table by clicking on them.
Device Port: Enter device port numbers. The default port number is 5050.
Enable PPPoE: Click the box to enable PPPoE. This is a DSL-connection application. The ISP will
ask the user to input a username and password. Contact your ISP for these details.
User Name: Enter the account's username for PPPoE.
Password: Enter the account's password for PPPoE.
Confirm PWD: Enter the password again to confirm it.
PPPoE IP: Enter the device's dynamic IP address.
After complete the settings, click Save to apply the changes.
36