EverFocus 288 Series User Manual page 37

7. Event signal icons
When an event is triggered, the alarm icon
and blink to alert the user. Click the icon to view the alarm information. On the pop-up window,
click Disarming / Arming to stop / start prompting alarm information, click Clear Alarm to remove
the current alarm information from the list.
8. Snapshot
Click the Snapshot button to take a snapshot, and the storage folder will pop up automatically. By
default, the snapshot will be saved at C:Everfocus/Value_3M/Snapshots. To change the location, see
Live View Snapshot in 7.1.9 Local Settings.
9. Record
Click the Record button to start / stop recording the current video stream. By default, the recordings
will be saved at C:Everfocus/Value_3M/Recordings. To change the location, see Live View Recording
in 7.1.9 Local Settings.
10. Two-way Audio
Click the Two-way Audio buttons to switch the sound on / off for the speakers and microphones (if
such external devices have been connected to the camera directly or via the network). To activate
the Audio function, the Complex Stream must be selected. See Stream in 7.2.1.2 Stream Settings.
Note that the camera provides the TRS line-in / out terminal I/O, therefore, TRS microphones /
speakers with a (built-in) amplifier and external power supply are required.
11. Full Screen
Click to display the current camera stream in full screen. To exit full screen, right-click the mouse or
press the ESC button on keyboard. Under full screen mode, these icons help you quickly be alerted
of motion events, turn the audio on/off and take snapshots.
When a motion event is triggered, the alarm icon will turn red
Click the Audio buttons to switch the sound on / off for the speakers (if such external devices
have been connected to the camera directly or via the network).
Click the Snapshot button to take a snapshot.
at the top of the Live View window will turn red
31
Value IP 288 / 368 / 468 Series
to alert the user.