Download Print this page
EverFocus Weatherproof Long Range IR Camera 235E Operation Instructions Manual

EverFocus Weatherproof Long Range IR Camera 235E Operation Instructions Manual

Weatherproof long range ir camera

Advertisement

Quick Links

Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not place any object on top of the cover.
2.
Be careful when handling the camera, do not drop it or subject it to strong shock or vibration
to prevent any damages to it. Do not disassemble it or place it on an unstable base.
3.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers because the magnetic fields generate from above devices will distort the
video image.
4.
Install the camera away from stoves, or other heat generating devices as the high temperature
could cause deformation, discoloration or other damages of the camera. Install the camera
at where the temperature range will stay between -40℃ to 50℃ (-40℉ to 122℉).
5.
Never aim the camera at the sun or other extremely bright objects whether it is in use or not.
6.
Do not touch the surface of CCD sensor by hand directly. Use a soft cloth to remove the
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean
the CCD sensor and the camera lens. When the camera is not in use, put the cover cap on
the lens mount.
7.
All warnings on the products and in the operating instructions should be adhered to.
8.
Do not use attachments not recommended by the appliance manufacturer as they may cause
hazards.
9.
Do not allow anything to rest on the power cord. Do not locate this appliance where the cord
Weatherproof Long Range IR Camera
EZ230E/235E/330E/335E
Model No.
EVERFOCUS

Operation Instructions

Advertisement

loading

Summary of Contents for EverFocus Weatherproof Long Range IR Camera 235E

  • Page 1: Operation Instructions

    Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. Do not allow anything to rest on the power cord. Do not locate this appliance where the cord EVERFOCUS Weatherproof Long Range IR Camera Operation Instructions EZ230E/235E/330E/335E Model No.
  • Page 2 will be abused by persons walking on it. 10. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 11. Never push objects of any kind into his appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
  • Page 3 PREFACE EZ230E/235E/330E/335E series camera is a true day/night, weather-proof, long range IR color camera, designed with the 1/3” SONY HAD color CCD to provide a high performance in low LUX environment. It is ideal for outdoor applications such as parking lots, gas stations and shopping malls.
  • Page 4: Standard Accessories

    STANDARD ACCESSORIES IR Long Range Camera x 1 Operation Instructions x 1 (this document) Waterproof Connector x 1 (connected to the camera body) Bracket x 1 Mounting kit includes: -Long Screws x 4 (for mounting bracket) -Short Screws x 4 (for connecting camera body to bracket) -Expanding Screws x 4 -Hex key x 1 (for adjusting bracket) -Hexagon wrench x 1 (for adjusting sunshield)
  • Page 5 DIMENSIONS Dimension of holes to holes Dimension of Bracket 215mm/8.6” 84mm/3.36” 45mm/1.8” 100mm/4” 95mm/3.8” 80mm/3.2” 196mm/7.84” The dimension of whole camera with bracket 217mm/8.68” 350mm/14”...
  • Page 6 NAMES AND FUNCTIONS OF BACK PANEL 24VAC model ○ ○ ○ Video Output Connector Connect the video output of the camera to a color monitor or other video devices through a 75 Ohm type coaxial cable with BNC female connector at backside of the camera. ○...
  • Page 7 INSTALLATION GUIDE Sun shield Fixing screw for sunshield Bracket Power connector Video output...
  • Page 8 1. Wire coaxial cable and power cable through the bracket. Note: Please use RG59/5C2V coaxial cable without connector 2. Fix the bracket to wall by using 4 screws.
  • Page 9 3. Open camera’s back cover: Loose the 2 screws from the back panel, then open the back cover. Screws for back panel 4. Take off the cap of waterproof connector which is under the camera. Power cable Coaxial cable Reserved...
  • Page 10 Note: 1. The holes of waterproof connector were plugged by stoppers, please remove the stoppers when you need to use it for connection. 2. Please always keep the smallest hole (5 mm) plugged by stopper, to avoid any possible damage caused by humidity. This is a reserved hole. 5.
  • Page 11 Video cable and power cable Note: 1. Power cable’s diameter must be under 10mm 2. Only use RG59/5C2V coaxial cable 6. Close the waterproof cap and fix waterproof connector to the base of camera firmly.
  • Page 12 7. Fix the camera body to bracket by using the 4 shorter screws. Connect RG59 coaxial cable with BNC connector. Unscrew the cable clips, wire power cable through the cable clips. Then, screw the cable clips to rear panel. Power cable Coaxial cable Cable Clips...
  • Page 13 10. Close the back cover and screw the 2 screws firmly. Now, you are done with the installation. ADJUSTMENT Adjust camera’s angle vertically or horizontally by using hex key included in package. Screws for back panel Loose this screw to make angle adjustment vertically Loose this screw to make angle adjustment horizontally...
  • Page 14: Specifications

    SPECIFICATIONS Type EZ230E Pickup Device Picture Elements Horizontal Resolution Video Output *Lens Type 6mm, 8mm 8mm, 16mm, 25mm Sensitivity 0.3 Lux/F=1.2 (AGC ON) Gamma Correction S/N Ratio Auto White Balance Black Light Comp. Auto Gain Control Sync. Mode IR LED Lifespan Weatherproof Power Source Power Consumption...
  • Page 15 415 Oser Avenue Unit S Hauppauge, NY 11788 TEL: 631-436-5070 FAX: 631-436-5027 www.everfocus.com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.