Replace the Avaya S8800 Server and its components
7. Push the server all the way into the rack until it clicks into place. See 7 in
8. Insert the optional M6 screws in the front of the server when you move the rack
Turning on the server
About this task
After the server is installed in the rack, turn it on to make sure that it works.
Important:
You must wait for the power-on LED to blink slowly (one flash per second) before pressing
the power button. If you press the power button while the power-on LED is blinking quickly
(three flashes per second), the server will not turn on.
16
Maintaining the Avaya S8800 Server for Avaya Aura
2.
cabinet or if you install the rack cabinet in a vibration-prone area. See
Comments? infodev@avaya.com
®
Communication Manager
Figure
Figure
3.
July 2012