Avaya S8800 Manual page 23

Removing a memory module
Before you begin
Remove the DIMM air baffle.
About this task
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. For more information, see
Procedure
Carefully open the retaining clips on each end of the memory module connector and
remove the memory module. See the following figure.
Maintaining the Avaya S8800 Server for Avaya Aura
1
2
3
Baffle pin
Baffle pin hole
DIMM air baffle
Protecting against ESD damage
®
Communication Manager
Replace the hardware components
on page 10.
July 2012 23