Avaya S8800 Manual page 25

Procedure
1. Carefully open the retaining clips on each end of the memory module connector.
2. Touch the static-protective package that contains the memory module to any
3. Remove the memory module from the package.
4. Turn the memory module so that the memory module keys align correctly with the
5. Insert the memory module into the connector by aligning the edges of the memory
6. Firmly press the memory module straight down into the connector by applying
Maintaining the Avaya S8800 Server for Avaya Aura
See the following figure.
Important:
Open and close the clips gently to avoid breaking the retaining clips or damaging
the memory module connectors.
1
2
unpainted metal surface on the server.
connector.
module with the slots at the ends of the memory module connector.
pressure on both ends of the memory module simultaneously.
The retaining clips snap into the locked position when the memory module is firmly
seated in the connector.
Important:
If there is a gap between the memory module and the retaining clips, the memory
module has not been correctly inserted. Open the retaining clips, remove the
memory module, and then reinsert it.
Memory module
Retaining clip
®
Communication Manager
Replace the hardware components
July 2012 25