Avaya S8800 Manual page 20

Replace the Avaya S8800 Server and its components
Procedure
1. Make sure that all internal cables, PCIe cards, and other components are installed
2. Position the cover on top of the server. See the following figure.
3. Slide the cover toward the front of the server.
4. Make sure that the cover correctly engages all the inset tabs on the server.
5. Slide the server all the way into the rack until it latches.
6. Reconnect the external cables and power cords.
20 Maintaining the Avaya S8800 Server for Avaya Aura
and seated correctly and that you have not left loose tools or parts inside the server.
Also, make sure that all internal cables are correctly routed.
Important:
Before you slide the cover forward, make sure that all the tabs on both the front,
back, and side of the cover engage the chassis correctly. If all the tabs do not
engage the chassis correctly, it will be very difficult to remove the cover later.
1
2
Comments? infodev@avaya.com
Cover
Tab
®
Communication Manager July 2012