Turning On The Server - Avaya S8800 Manual

Server rack installation
14. Slide the server into the rack until it snaps into place.
15. Insert the optional M6 screws in the front of the server when you move the rack

Turning on the server

After the server is installed in the rack, turn it on to make sure that it works. Once you determine
that it works, turn it off before you start any software installation procedure.
24 Installing the Avaya S8800 Server for Avaya Aura
Note:
Allow slack in all cables to avoid tension in the cables as the cable-
management arm moves.
cabinet or if you install the rack cabinet in a vibration-prone area. See the following
figure.
™
Communication Manager June 2010