Avaya S8800 Manual page 41

Next steps
Install a new RAID battery.
Installing the RAID battery
Before you begin
Remove the existing RAID battery.
About this task
The RAID battery is located on top of the RAID controller card.
The RAID configuration data is preserved when you replace the battery.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. For more information, see
Procedure
1. Connect the battery cable to the connector on the battery.
2. Press the new battery onto the battery carrier until the clip on the side of the battery
3. Install the cover.
4. Reconnect the external cables and power cords.
5. Turn on the attached devices and the server.
Maintaining the Avaya S8800 Server for Avaya Aura
snaps into place. See the following figure.
1
2
Protecting against ESD damage
Battery
Battery carrier
®
Communication Manager
Replace the hardware components
on page 10.
July 2012 41