Avaya S8800 Manual page 37

Hazardous voltage, current, and energy levels are present inside any component that has
this label attached. These components do not contain any serviceable parts. If you suspect
a problem with one of these parts, replace the power supply.
Important:
During normal operation, each power supply bay must contain either a power supply or
power supply filler for proper cooling.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. For more information, see
Procedure
1. If the server has only one power supply, turn off the server and peripheral devices
2. If the server is in a rack, at the back of the server, pull back the cable management
3. Press and hold the orange release tab to the left. See the following figure.
Maintaining the Avaya S8800 Server for Avaya Aura
and disconnect all power cords. If the server has two power supplies, you can
replace one power supply while the server is running.
arm to gain access to the rear of the server and the power supply.
Protecting against ESD damage
®
Communication Manager
Replace the hardware components
on page 10.
July 2012 37