Installing the Avaya S8800 Server
14. Slide the server into the rack until it snaps into place.
15. Insert the optional M6 screws in the front of the server when you move the rack
Turning on the server
After the server is installed in the rack, turn on the server to make sure that it powers up
properly. Once you determine that it powers up properly, turn it off before you start any software
installation procedure.
24
Installing the Avaya S8800 Server for Avaya Aura
Note:
Allow slack in all cables to avoid tension in the cables as the cable-
management arm moves.
cabinet or if you install the rack cabinet in a vibration-prone area. See the following
figure.
Collaboration Server
®
December 2010