Avaya S8800 Manual page 38

Replace the Avaya S8800 Server and its components
4. Pull the power supply part of the way out of the bay, and then release the latch and
Next steps
Install a power supply.
Installing a power supply
About this task
Caution:
To remove all electrical current from the server, ensure that all power cords are disconnected
from the power source. The power control button on the server does not turn off the electrical
current supplied to the server. The server also might have more than one power cord.
Caution:
Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component that has
this label attached. These components do not contain any serviceable parts. If you suspect
a problem with one of these parts, replace the power supply.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. For more information, see
Procedure
1. Touch the static-protective package that contains the power supply to any unpainted
38 Maintaining the Avaya S8800 Server for Avaya Aura
1
2
3
support the power supply as you pull the power supply the rest of the way out of the
bay.
metal surface on the server.
Comments? infodev@avaya.com
Power supply release tab
Power supply filler
Power supply
Protecting against ESD damage
®
Communication Manager
on page 10.
July 2012