Manifolds; Function Manifold Components - Gs-1330M - Terex Genie GS-1330m Service And Repair Manual

August 2021
5-1
Function Manifold Components – GS-1330m
The function manifold is mounted on the hydraulic pump.
Index No.
1 Solenoid valve, 2 position 4 way
2 Diagnostic port
3 Check valve
4 Relief valve, 2250 psi / 155 bar
5 Solenoid valve, 3 position 4 way
6 Relief valve, 1600 psi / 110 bar
--- Coil nut
How to Install a Valve Cartridge
1 Dip the cartridge in clean oil to lube the O-rings.
2 Screw the cartridge in by hand until the top O-ring is met, then torque to specifications.
3 If required, install the valve coil(s) onto the valve stem. Install the coil nut onto the valve stem and
torque to specifications.
Part No. 1309020GT
Description
GS ™ -30m • 32m • 30 • 32 • 46 • 55
Service and Repair Manual
Schematic
Function
Item
EC Platform up
EF Test port
EE Drive circuit
ED System relief
EA Steer left/right
EB Steer relief
EA, EC ---

Manifolds

Torque
20 ft-lbs / 27 Nm
---
25 ft-lbs / 34 Nm
22 ft-lbs / 30 Nm
20 ft-lbs / 27 Nm
22 ft-lbs / 30 Nm
4-5 ft-lbs / 5-7 Nm
47