Service and Repair Manual
Manifolds
5-1
Function Manifold Components –
GS-1530, GS-1532, GS-1930 and GS-1932
The function manifold is mounted under the machine, between the module trays.
Index No. Description
—
Coil nut (item F)
—
Coil nut (items E and H)
1
Diagnostic port
2
Check disc
Relief valve, 1800 to 3700 psi / 124 to
3
255 bar
4
Check valve, 10 psi / 0.7 bar
5
Solenoid valve, 3 position 4 way
6
Solenoid valve, 3 position 4 way
7
Flow regulator and relief valve,
0.75 gpm / 2.8 L/min
1500 psi / 130 bar
8
Solenoid valve, 2 position 4 way
9
Relief valve, 3700 psi / 255 bar maximum
How to Install a Valve Cartridge
1
Dip the cartridge in clean oil to lube the O-rings.
2
Screw the cartridge in by hand until the top O-ring is met, then torque to specifications.
3
If required, install the valve coil(s) onto the valve stem. Install the coil nut onto the valve stem and
torque to specifications.
54
Schematic Item
—
—
A
B
C
D
E
F
G
H
I
GS
™
-30 • 32 • 46 • 47
Function
—
4-5 ft-lbs / 5-7 Nm
—
5-7 ft-lbs / 7-9 Nm
Test port
Steer circuit
18 ft-lbs / 24 Nm
Lift relief
20 ft-lbs / 27 Nm
Drive circuit
20 ft-lbs / 27 Nm
Drive
25 ft-lbs / 34 Nm
forward/reverse
Steer left/right
25 ft-lbs / 34 Nm
Steer circuit
26 ft-lbs / 35 Nm
Platform up
25 ft-lbs / 34 Nm
System relief
20 ft-lbs / 27 Nm
Part No. 1272217GT
March 2021
Torque
—