Repair Procedures; Introduction; Observe And Obey; Read, Understand And Obey The Safety Rules And Operating Instructions In The Appropriate Operator's Manual On Your Machine - Terex Genie GS-1330m Service And Repair Manual

Service and Repair Manual

Repair Procedures

Secti on 3 Repair P roce dur es

Observe and Obey:

Repair procedures shall be completed by a

person trained and qualified on the repair of
this machine.
Immediately tag and remove from service a

damaged or malfunctioning machine.
Repair any machine damage or malfunction

before operating the machine.
Before Repairs Start:
Read, understand and obey the safety rules

and operating instructions in the appropriate
operator's manual on your machine.
Be sure that all necessary tools and parts are

available and ready for use.
Use only Genie approved replacement parts.

Read each procedure completely and adhere

to the instructions. Attempting shortcuts may
produce hazardous conditions.
16
Machine Configuration:

GS ™ -30m • 32m • 30 • 32 • 46 • 55
Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
• Machine parked on a firm, level surface
• Key switch in the off position with the key
removed
• The red Emergency Stop button in the off
position at both the ground and platform
controls
• Wheels chocked
• All external AC power supply disconnected
from the machine
• Platform in the stowed position
August 2021
Part No. 1309020GT