Terex Genie GS-1330m Service And Repair Manual page 122

Service and Repair Manual
Scissor Components
73 Remove the cables from the number 1 cable
bridge and lay them off to the side.
Component damage hazard.
Cables can be damaged if they
are kinked or pinched.
74 Disconnect the number 1 cable bridge from
the number 1 outer arm (index #17) and
remove the cable bridge from the machine.
75 Attach a lifting strap from an overhead
supporting device to the number 1 inner arm
(index #8).
76 Raise the arm slightly and remove the block.
77 Lower the arm to the stowed position.
Bodily injury hazard. Keep
hands clear of moving parts
when lowering the scissor arms.
78 Secure the ends of the scissor arms together
at the steer end of the machine with a strap or
other suitable device.
79 Secure the ends of the scissor arms together
at the non-steer end of the machine with a
strap or other suitable device.
80 Remove the retaining fasteners securing the
chassis mount bracket to the chassis.
81 Remove the linkset from the machine
Bodily injury hazard. The
number 1 inner and outer arms
(index #8 and #17) may become
unbalanced and fall if not
properly supported when
removed from the machine.
Component damage hazard. Be
sure not to damage the limit
switch or level sensor
components when the number
1 inner and outer arms (index
#8 and #17) are removed from
the machine.
108 GS ™ -30m • 32m • 30 • 32 • 46 • 55
August 2021
Part No. 1309020GT