Terex Genie GS-1330m Service And Repair Manual page 178

Service and Repair Manual
Scissor Components
3 Pull out the red Emergency Stop button at the
ground controls.
Result: The ground control LCD display will
show the following.
Press the scroll down button.
4
Result: The ground control LCD display will
show the following.
5 Press the enter button.
Result: The ground control LCD display will
show the following.
6 Press the enter button.
Result: The ground control LCD display will
show the following.
164
7
8
9
Note: After each key press an asterisk (*) will
appear on the second line of the LCD display.
Note: After 3 seconds the LCD display will return
to SELECT OPTION PLAT. OVERLOAD.
10 Push in the red Emergency stop button.
GS ™ -30m • 32m • 30 • 32 • 46 • 55
Press and hold the scroll down button for
5 seconds.
Result: The ground control LCD display will
show the following.
Press the enter button.
Result: The ground control LCD display will
show the following.
Press the buttons in the following sequence:
(down)(down)(up)(enter).
Result: The ground control LCD display will
show the following.
August 2021
Part No. 1309020GT