Replacing The Clutch Cable - Toro Greensmaster Flex 1018 Service Manual

Replacing the Clutch Cable

g261995
1. Clutch cable
2. Jam nut
3. Cable spring
Removing the Clutch Cable
Greensmaster ® Flex 1018/1021
20247SL Rev A
4. Split bushing
5. Main control shaft
6. Clevis pin
Note: Refer to Figure 52
1. Park the machine on a level surface. Ensure that the engine is OFF and
the traction control is in NEUTRAL.
2. Remove the spark plug wire from the engine spark plug.
g262017
1. Clutch cable
2. Jam nut
3. Remove the clutch cable (item 1 in
assembly as follows:
A. Loosen the front cable jam nut (2) and lift the clutch cable (1) from the
casting slot of the engine base.
Figure 52
during this procedure.
Figure 53
3. Cable eyelet
4. Retaining ring
Figure
Page 7–9 Controls, Wheels and Accessories : Service and Repairs
7. Link assembly
8. Clip pin
9. Upper receiver weldment
5. Clutch lever
53) from the transmission