Toro Greensmaster Flex 1018 Service Manual page 92

Assembly of Differential Assembly
Installing the Differential Assembly
Traction and Reel Drive Systems: Service and Repairs
1. Place the differential housings (1) on the work bench.
2. Insert the 3 differential pins (2) in each differential housing.
g260016
1. Differential spur gears with shoulder up
3. The differential pins (2) must be inserted in alternate holes of the differential
housing (1) and ensure that the differential pins (2) are flush to the surface of
the differential housing; refer to
4. Apply a coat of grease to the differential spur gears (3) and the differential
pins (2).
5. Insert the differential spur gears (3) to the differential pins (2) by pointing
the gears shoulder up.
6. Fill the differential housing assembly (1) with 0.08 lb (1.25 oz) of grease.
7. Attach the 2 differential housings (1) to each other.
8. Slide and install the differential housing assembly (1) into the differential gear
(4) and secure with the 6 socket head screws (5).
9. In alternate pattern torque tighten the socket head screws (5) to 10 to 12.4
N∙m (90 to 110 in-lb).
Install the differential assembly into the transmission gear box; refer to
Assembling the Transmission Gear Box Assembly (page
Figure 41
2. Press flush
Figure 41.
Page 5–38
5–31).
Greensmaster ® Flex 1018/1021
20247SL Rev A