Drum Assembly - Toro Greensmaster Flex 1018 Service Manual

Drum Assembly

g258878
1. Transmission gear box assembly
2. Traction drum
3. Splined coupler (4 each)
4. Washer (4 each)
Removing the Drum Assembly
Greensmaster ® Flex 1018/1021
20247SL Rev A
5. Lock nut (2 each)
6. Shoulder bolt (6 each)
7. RH hex shaft
8. Drum drive gear box assembly (2
each)
Note: Refer to Figure 28
1. Park the machine on a level surface. Ensure that the engine is OFF. Remove
the spark plug wire from the engine spark plug.
2. Remove the LH and RH drum drive gear box assemblies (item 8 in
28); refer to Removing the Drum Drive Gear Box Assembly (page
3. Remove the traction drum (2) from the frame assembly (9).
Figure 28
10.
11.
12.
during this procedure.
Page 5–17 Traction and Reel Drive Systems: Service and Repairs
9. Frame assembly
Shoulder bolt (2 each)
Truss screw
LH hex shaft
Figure
5–11).