Toro Greensmaster Flex 1018 Service Manual page 129

Removing the Kickstand (continued)
Installing the Kickstand
g260998
1. Kickstand (raised)
Greensmaster ® Flex 1018/1021
20247SL Rev A
1. Park the machine on a level surface. Ensure that the engine is OFF and
the traction control is in NEUTRAL.
2. Remove the spark plug wire from the engine spark plug.
3. Pivot the kickstand up and hold against the frame stops.
4. Remove the bolt (item 11 in
and torsion spring (2) to the kickstand (16).
5. Remove the spring mount pin (3) and torsion spring (2) from the kickstand
(16).
6. Remove the bolt (11), spacer (10) and nut (5) that secures the kickstand
(16) to the frame (9).
7. Remove the kickstand (16) from the frame (1).
8. If necessary, remove the spring retainer (14) by removing the nut (15),
washer (13) and bolt (12).
9. If necessary, remove the spacers (10) from the kickstand (16).
2. Torsion spring
Figure 61) that secures the spring mount pin (3)
Figure 62
Page 7–25 Controls, Wheels and Accessories : Service and Repairs
3. Kickstand (lowered)