Toro Greensmaster Flex 1018 Service Manual page 136

Disassembly of the Flex Frame Assembly
g313493
1. Pivot pin latch (2 each)
2. E-ring (2 each)
3. Lever (2 each)
4. Pivot pin (2 each)
5. Spring (2 each)
6. Weight
7. Flange nut (3 each)
Assembly of the Flex Frame Assembly
Installing the Flex Frame Assembly
Controls, Wheels and Accessories : Service and Repairs
8. LH hub end
9. Roll frame assembly
10. Flange nut (8 each)
11. Flex link (4 each)
12. Flange bushing (8 each)
13. Carriage bolt (4 each)
14. RH hub end
Disassemble the flex frame assembly using the
Assemble the flex frame assembly using the
1. Position the flex frame assembly onto the machine assembly.
2. Secure the flex frame assembly to the machine assembly with the four
socket head screws.
3. Install the cutting unit onto the machine; refer to Operator's Manual.
4. Attach the spark plug wire to the spark plug.
Figure 68
15.
16.
17.
18.
19.
Figure 68
Page 7–32
Isolator
Flange nut (3 each)
Frame link
Carriage bolt (3 each)
Flex frame
Figure 68 as a guide.
as a guide.
Greensmaster ® Flex 1018/1021
20247SL Rev A