Toro Greensmaster Flex 1018 Service Manual page 60

Removing the Reel Drive Belt (continued)
Installing the Reel Drive Belt
Traction and Reel Drive Systems: Service and Repairs
5. Remove the reel drive belt (2) from the pulleys.
1. Ensure that the carriage bolt (4) is loose enough to move the idler arm (3)
freely.
2. Place the new drive belt (2) onto the pulleys.
3. Adjust the reel belt tension; refer to
4. Ensure that the reel drive gasket (5) is in position and install the reel drive
cover (6) to the reel drive assembly (1) and secure with the 4 socket head
screws (7).
5. Torque tighten the socket head screws to 1.7 to 4.5 N∙m (15 to 40 in-lb).
Use an alternation pattern and torque tighten the socket head screws to 9.6
to 10.7 N∙m (85 to 95 in-lb).
6. Attach the spark plug wire to the spark plug.
Adjusting the Reel Drive Belt (page
Page 5–6
5–3).
Greensmaster ® Flex 1018/1021
20247SL Rev A