Toro Greensmaster Flex 1018 Service Manual page 133

Assembling the Transport Wheel
Installing the Transport Wheel
Greensmaster ® Flex 1018/1021
20247SL Rev A
1. If the shoulder screws were removed from the hub, apply Loctite #242 (or
equivalent) to the threads of the shoulder screws. Secure the torsion spring
and retaining lever to the hub with the shoulder screws.
2. Assemble the tire, tube, and deep rim.
3. Install the shallow rim into the tire. Align and secure the shallow rim tot he
deep rim with 4 bolts and 4 flange nuts. Tighten the fasteners.
4. Install the hub into the deep rim. Secure the hub to the deep rim with the 3
bolts and 3 lock washers. Tighten the fasteners.
5. Inflate the tire to 83 to 103 kPa (12 to 15 psi).
1. Ensure that the machine is parked on a level surface.
2. Support the machine onto the kickstand.
3. Slide the transport wheel completely onto the wheel hex shaft until the wheel
retaining lever is secured into the groove onto the wheel hex shaft.
Page 7–29 Controls, Wheels and Accessories : Service and Repairs