Toro Greensmaster Flex 1018 Service Manual page 62

Removing the Reel Drive Assembly (continued)
Traction and Reel Drive Systems: Service and Repairs
3. Remove the reel drive belt; refer to
(page 5–7).
4. Remove and discard the reel drive gasket (3) from the housing (25).
5. If necessary remove the expansion plug (1) from the reel drive cover (2).
6. Remove the nuts (19), socket head screws (26) and bolt (10) that secures
the reel drive housing (25) to the cutting unit.
7. Remove the reel drive housing assembly from the cutting unit.
8. Remove the V-ring seal (21) from the reel shaft driven (22).
9. Remove the nut (18) and washer (24) from the reel drive housing (25) and
carriage bolt (6) from the idler arm (28).
10. Remove the socket head screw (30) that secures the idler arm (28) to the
reel drive housing (25).
11. If necessary, remove the idler bushing (29) from the idler arm (28).
12. Remove the retaining ring (4) and use a press to remove the 2 ball bearings
(5) from the idler arm (28). Discard the ball bearings after removal.
13. Remove the lock nut (7), reel pulley (27), hipro key (12) and spacer (9) from
the reel shaft driven (22).
14. Slide and remove the reel shaft driven (22) from the reel drive housing (25).
15. Remove the locknut (7), reel pulley (8), hipro key (12) and spacer (9) from
the reel shaft driver (13).
16. Slide and remove the reel shaft driver (13), helical coupling (14) and coupler
shaft (16) from the reel drive housing (25).
17. Remove and discard the bearing shield (11) from the reel drive housing (25).
18. Remove and discard the O-ring (20) from the reel drive housing (25).
g312505
1. Pivot sleeve
2. Ball bearing
3. Retaining ring
19. If necessary, remove the retaining rings (3 and 4) from the reel drive housing
(6).
20. Use a press to remove the 4 ball bearings (2 and 5) from the reel drive
housing (6). Discard the ball bearings after removal.
Removing the Reel Drive Assembly
Figure 23
4. Retaining ring
5. Ball bearing
6. Reel drive housing
Page 5–8 Greensmaster ® Flex 1018/1021
20247SL Rev A