Toro Greensmaster Flex 1018 Service Manual page 87

Assembling the Transmission Gear Box Assembly (continued)
g259843
1. Transmission housing
Greensmaster ® Flex 1018/1021
20247SL Rev A
bearing spacer (4) onto the transmission housing assembly (20) and secure
with the short bearing pin and nut (8).
18. Use a press to install the 3 new ball bearings (item 6 in
spur gear (7) and secure with the 2 retaining rings (5).
19. Apply a coat of grease to the O-ring (item 2 in
onto the long bearing pin (3). Install the spur gear assembly (7) and bearing
spacer (4) onto the transmission housing assembly (20) and secure with
the long bearing pin (3) and nut (8).
20. Insert the square keys (item 13 in
apply a coat of grease to outside of the keys.
21. Slide the slider spur gear (item 14 in
(12) and secure with the retaining rings (11). Press the new ball bearings
(10) onto the reel drive shaft (12).
22. Install the wave spring (item 9 in
the transmission housing assembly (20).
23. Insert the reel clutch shoe (item 15 in
(16). Slide the reel clutch actuator (16) into the transmission housing
assembly (20).
24. Assemble the brake lever assembly (item 19 in
A. Apply a coat of grease to the O-ring (item 20 in
O-ring onto the brake lever.
B. Place the brake lever (item 19 in
secure with the brake clevis pin (21) and retaining ring (17).
Figure 35) into the reel drive shaft (12) and
Figure
Figure 35) and reel drive assembly (14) into
Figure
Figure
Figure 38
2. Dowel pin
Page 5–33 Traction and Reel Drive Systems: Service and Repairs
Figure 35) into the
Figure 35) and slide the O-ring
35) onto the reel drive shaft
35) into the reel clutch actuator
Figure 34) as follows:
Figure 34) and slide the
34) onto the brake band (18) and