Flex Frame Assembly - Toro Greensmaster Flex 1018 Service Manual

Flex Frame Assembly

g313494
1. Machine assembly
Removing the Flex Frame Assembly
Greensmaster ® Flex 1018/1021
20247SL Rev A
2. Socket head screws (4 each)
1. Park the machine on a level surface. Ensure that the engine is OFF and
the traction control is in NEUTRAL.
2. Remove the spark plug wire from the engine spark plug.
3. Remove the cutting unit from the machine; refer to Operator's Manual.
4. Remove the four socket head screws (2) that secures the flex frame
assembly (2) to the machine assembly (1).
5. Slide and remove the flex frame assembly (2) from the machine assembly (1).
Figure 67
Page 7–31 Controls, Wheels and Accessories : Service and Repairs
3. Flex frame assembly