Toro Greensmaster Flex 1018 Service Manual page 82

Disassembling the Transmission Gear Box Assembly (continued)
Traction and Reel Drive Systems: Service and Repairs
8. Use a press to remove the 2 ball bearings (13) and 2 flange bearings (12)
from the differential assembly (14). Remove the V-ring seal (15) from the
differential assembly (14). Discard the ball bearings (13).
9. If necessary, disassemble the differential assembly (14); refer to
of Differential Assembly (page
10. Remove the bolt (25) that secures the cable brake lever (24) onto the brake
lever (19). Slide and remove the cable brake lever (24) and external retaining
ring (1) from the brake lever (19).
11. Remove the 4 bolts (8) that secures the retainer plate (16) to the transmission
housing assembly (23). Remove the retainer plate (16) from the transmission
housing assembly (23).
12. Slide and remove the brake lever assembly (19) from the transmission
housing assembly (23). Remove the flat wire spring (22) from the
transmission housing assembly (23).
13. Disassemble the brake lever assembly (19) as follows:
A. Remove the retaining ring (17) from the brake clevis pin (21).
B. Slide and remove the brake clevis pin (21) from the brake band (18)
and brake lever (19).
C. Remove the brake lever (19) from the brake band (18).
D. Remove and discard the O-ring (20) from the brake lever (19).
5–37).
Page 5–28
Disassembly
Greensmaster ® Flex 1018/1021
20247SL Rev A