Fax Settings: Pfx-50 - Furuno FS-1562 Manual

FELCOM 81

3.4 FAX settings: PFX-50

1. Clearing contents of RAM
To clear all contents of RAM, turn the power on while pressing and holding down the
[1] [3] and [*] keys together.
2. How to set up FAX
The setting changes to the factory default if the machine is not used for about one month
or more. Follow the steps below to set up the fax.
1. Turn on the fax while pressing and holding down [1] [3] and [*].
2. Press [AUTO RCV/YES].
3. Enter ship's name by referring character code list in the operator's manual.
4. Press [AUTO RCV/YES].
5. Enter the fax number of own station.
6. Press [AUTO RCV/YES] twice.
7. Press [FUNCTION/NO] to change line type from DP to PB.
8. Press [AUTO RCV/YES] twice.
9. Enter Year/month/date and time. For example, type 9902101230 for 12:30, February 1999.
10. Press [AUTO RCV/YES]. After 2 seconds, "TEL/FAX" appears.
11. Press [FUNCTION/NO] three times.
12. Press [YES], [NO], and then [NO].
13. Press [YES], and then [NO] four times.
14. Press [YES].
15. Press [YES].
16. Change receiving mode to FAX by pressing [AUTO RCV/YES] several times.
H2-6