4. Jumper Setting
Change the jumper plug setting (JP2) on the CONTROL board according to the type of
the wing microphone : Carbon MIC or Dynamic MIC.
Handset
- HS-6000FZ6
- HS-6000FZ5
MIC Receptacle Box
-RBD-VHF
-RBD-VHF-B
For dynamic MIC, set R152 on the CONTROL board at fully counterclockwise (max).
No adjustment is required for carbon MIC.
(Carbon MIC)
(Dynamic MIC)
(For Carbon MIC)
(For Dynamic MIC)
Top view of CONTROL PCB
E4-8
FM-8500