User (Preset) Channel Programming - Furuno FS-1562 Manual

4. User (Preset) Channel Programming

The 'TX freq. selection" (9901) is set to "1" (Free), so you may store frequencies by
recalling the ITU/DSC channels or by keying in a frequency through the keyboard.
Select class of emission, bandwidth, and frequency, then press the following keys to store
the frequencies (class of emission & BW as well) into the user channel.
[STO] (User CH No.) [ENT] [ENT]
*User CH No. : 1 to 8999 CH (storage capacity: 400 CH)
Execute the following key sequence to store ITU frequencies (class of emission & BW as
well) into the user channel.
[ITU] (ITU CH No.) [ENT]
[STO] (User CH No.) [ENT] [ENT]
Note)
To see stored user channels, press [RCL] 9998 [ENT].
To erase a user channel, press [STO] "User CH No." [ENT] [0] [ENT].
A3-15
FS-5000/8000