Power And Frequency Measurement Of Vhf Radiotelephone - Furuno FS-1562 Manual

9. Power and Frequency measurement of
The VHF CH 70 is not transmitted by pressing a PTT switch. To measure the output
power of VHF CH 70, follow the below. The radiotelephone must be set to CH 70.
The VHF radiotelephone TX key line is controlled by the DSC-5/5V.
The DSC-5/5A muse be set the Ignore ID ON. Refer to section "2.1 Changing System
settings".
Ignore ID ON
or
Select "MC",
press [ENT] key.
VHF Radiotelephone
TEST
Function < >
CALL RCV XMIT PROG
Program < >
TIME COMM SYST TEST
Self test
MO TO RR RL LL MC K D P
Tone test < >
MARK SPACE DOT T1 T2
Tone test < Space tone >
Now doing
Self - test
MO TO RR RL LL MC K D P
Manual cont out < >
IN OUT
Manual cont out < >
ALM DIS VK VM HK HM HH
Manual cont out < VK Key >
ON
Manual cont out < VK Key >
OFF
TEST
B1-18
Press [SELECT] key.
Select "PROG", press [ENT] key.
Select "TEST", press [ENT] key.
Select "TO", press [ENT] key.
MARK tone:1700Hz-400Hz
Don't select T1 and T2 !!
SPACE tone:1700Hz+400Hz
DOT:1700Hz+400Hz
Select "MARK or Space", press [TEST] key.
For example, select "Space".
Outputting tone signal
Press [CANCEL] key several times.
Return to "self test" display.
Select "MC", press [ENT] key.
Select "OUT", press [ENT] key.
Select "VK", press [TEST] key.
Tx ON
(Measurment: power and frequency)
Press [TEST] key.
Tx OFF
Press [CANCEL] key several times.
DSC-5
156.525MHz
(+10ppm)