Furuno FS-1562 Manual page 108

4. Clear to RAM 1, RAM 2 or EEROM.
RAM 1 or RAM 2 clear
When Select to RAM 1 or RAM 2, press the [ENT] key;
For DSC-8VP
For DSC-8V
The normal display appears.
EEROM clear
When select to EEROM, press the [ENT] key;
After about 15 second ,
For DSC-8VP
For DSC-8V
The initial setting display appears.
(Refer to section "3. System settings list")
Item
RAM 1
RAM 2
EEROM
a, The power is automatically cut off.
b, Turn the power on again manually.
Turn the power off and on again manually.
Watch VHF CH70
a, The power is automatically cut off.
b, Turn the power on again manually.
Turn the power off and on again manually.
TEST
Note)
Before clearing EEROM, print out the contents of EEROM
by pressing the [4] key.
Clears work area only in the S-RAMs.
Clears all contents of the S-RAMs
(incl. transmitted and received messages, and prepared in
messages/address/Tel No in FILE menu: [SELECT] [7])
Clears contents of EEROM.
(Own ship's ID number, etc)
B3-6
Contents of S-RAM and EEROM
Purpose
DSC-8V/8VP