Changing System Settings (Protection On/Off) - Furuno FS-1562 Manual

2.2 Changing system settings
The set up menu appears by pressing the [SELECT] key at the normal display.
To release protection of menu 9, follow the steps below.
Watch VHF ch70
auto
System <Protection >
V P ID ----
* System protected *
Protection < ON >
ON OFF
System <Own ID number >
V P ID ----
After changing the settings, set the "Protection" menu shown
below to "ON" for normal operation.
TEST VHF ch70
manual
Protection <OFF >
ON OFF
Watch VHF ch70
auto
Watch VHF ch70
auto
[SELECT]
Set up menu < M.Position >
1 2 3 4 6 7 9 ALM
[SELECT] [9] [ ]
Select "P" and press [ENT] key.
Enter cypher code "652111"
Select "OFF" and press [ENT] key.
Now you can reset the followings.
* DSC block * RT block
* Channel system * Power setting
* Setting language
The registered MMSI number and Private mode"ON or OFF" is reading only.
If you want to change MMSI number and Private mode "ON or OFF",
refer to section "5. Changing ID and Private mode".
Importamt !!
[SELECT] [9] [>]
Select "ON" and press [ENT] key.
Press [CANCEL] key several times.
Returns to normal display.
E5-5
(Protection ON/OFF)
Set up menu
[ENT]
FM-8700