Changing Dip Sw And Internal Connector - Furuno FS-1562 Manual

Hide thumbs Also See for FS-1562:

Table of Contents

3.6 Changing DIP SW and Internal Connector

Change DIP SW of CPU Card and connector wiring for FD drive in the IB-581.

Changing DIP SW of CPU Card

Remove the casing of IB-581, and turn on DIP SW "#5" and "#6" of CPU Card.

DIP SW "#8" is already on.

1 2 3 4 5 6 7 8

DIP SW "8" is already on.

Changing Internal Connector

Change the connection of the flat cable connected between the CPU Card and the FD drive

This connector change switches the FD drive from B-drive to A-drive.

Connect this connector to FD drive.

Note) Be cautions about the

connector inserting direction.

Originally connected connector

Show Quick Links

Table of Contents